Carpet tufting machine Full-time Job

The two most important points are 1. Always apply significant pressure with the carpet tufting machine against the backing cloth. If consistent pressure isn't applied the yarn will be pushed towards you instead of away and will create inconsistent pile height. 2. Rotate the carpet tufting machine in the direction you want to go, keeping the foot in front. The foot is the curved metal part near the needle. ;

Finishing your rug.

It is usual for a beginner that watches a tufting gun tutorial but doesn’t understand the exact Tufting Parts.

First of all, a conventional tufting machine can be seen as two parts: machine body and handle. ;

Part ①: thread hole. It is used for giving the yarn wire a fixed path so you can tuft more smoothly.

A FRS Tufting Machine is a handheld machine where yarn is fed through a needle and subsequently punched in rapid succession through a backing fabric, either with or without scissors. Electric tufting guns can be cut-pile, loop-pile, or a combination of both and are able to produce multiple pile heights.

The FRS tufting machine makes jacquard designs by independently control the feeding quantity of each yarn, thus achieve the high and low pile effect. It can make two or three heights on one carpet.The Automatic Foaming Machine is a high capacity machine for production of a continuous slab of flat top flexible PU foam with easy operation. Blocks of desired length can be cut with the help of a block cut-off machine at the end of the conveyor. This machine comes along with a three conveyor system & a large touch panel for operation (PLC-Touch Panel). All trial & production recipes may be stored in the PLC memory and can be recalled easily.

The new ICN (individually-controlled needle) tufting machine is a major step forward for the carpet industry in productivity and flexibility.

For the first time carpet manufacturers have available a tufting machine which will produce carpet with full width, non-repetitive patterns. The machine can also show yarn savings up to 30%, an exceptionally important benefit in today’s unpredictable economy.

The Single Needle Table Tufting Machine is developed from embroidery machine. It is computerized control single tufting needle to achieve patterned designs with max. 9 colors. ;

The Single Needle Table Tufting Machine can replace the traditional manual tabletop tufting machine, it can do more exquisite and complicated patterns. Need less labor and easy operation.

This computerized single needle table tufting equipment can make cut pile carpets and rugs with max. 9 colors. This machine is widely used on making complicated and exquisite patterns. ;

Hot Melt Coating Machine

A hot melt coating machine, or slot die coating machine, achieves the application of an adhesive, film, or coating without the use of water or solvents. As mentioned above, in alternative methods, the addition of water or solvents is used to reduce consistency and viscosity of adhesives and coatings in order to allow them to be applied evenly and effectively. However, many adhesives can also be thinned by heating them to the point that their consistency and viscosity are temporarily compromised.