Button Full-time Job

A button is a fastener that joins two pieces of fabric together by slipping through a loop or by sliding through a buttonhole. In modern clothing and fashion design, buttons are commonly made of plastic but also may be made of metal, wood, or seashell. Buttons

Shank buttons have a hollow protrusion on the back through which thread is sewn to attach the button. Button shanks may be made from a separate piece of the same or a different substance as the button itself, and added to the back of the button, or be carved or moulded directly onto the back of the button, in which latter case the button is referred to by collectors as having a 'self-shank'. Snap buttons (also pressure buttons or press studs) are metal (usually brass) round discs pinched through the fabric. They are often found on clothing, in particular on denim pieces such as pants and jackets. They are more securely fastened to the material. As they rely on a metal rivet attached securely to the fabric, pressure buttons are difficult to remove without compromising the fabric's integrity. They are made of two couples: the male stud couple and the female stud couple. Each couple has one front (or top) and rear (or bottom) side (the fabric goes in the middle).

A label (as distinct from signage) is a piece of paper, plastic film, cloth, metal, or other material affixed to a container or product, on which is written or printed information or symbols about the product or item. Information printed directly on a container or article can also be considered labelling. Labels have many uses, including promotion and providing information on a product's origin, manufacturer (e.g., brand name), use, safety, shelf-life and disposal, some or all of which may be governed by legislation such as that for food in the UK or United States. Methods of production and attachment to packaging are many and various and may also be subject to internationally recognised standards. In many countries, hazardous products such as poisons or flammable liquids must have a warning label. Metal labels,

From a texture point of view, most of the materials for making tags are paper, but also plastic and metal. In addition, new hang tags made of holographic anti-counterfeiting materials have also appeared. From the perspective of its shape, it is even more varied: there are long strips, half-folded, round, triangular, pocket-shaped and other special shapes, which are really colorful and dazzling.

PVC is the abbreviation of polyvinyl chloride. It is a polymer material and one of the largest general-purpose plastics in the world. It is widely used. Widely used in building materials, industrial products, daily necessities, floor leather, floor tiles, artificial leather, pipes, wires and cables, packaging films, bottles, foam materials, sealing materials, fibers, etc. The main characteristics of PVC hang tags are high brightness, durability, flexibility and ready-to-stick properties, moisture resistance, UV resistance, aging resistance, chemical solvent resistance, etc.

Cord ends is an accessory product used to realize electrical connection, which is divided into the category of connector in industry. With the increasing degree of industrial automation and the stricter and more precise requirements of industrial control, the amount of terminal blocks is gradually increasing. With the development of the electronics industry, the use of terminal blocks is increasing, and there are more and more types. In addition to PCB board terminals, the most widely used ones are metal cord ends, nut cord ends,